Видео

Hi, I wanted to say thank you so much for your this video because it helped me a lot and fixed it exactly the way you have explained. You are so amazing thank you.

It is literally the exact same identical connector dude. Down to the markings on the plastics, everything. What were you smoking?? And that gaffa tape is not recent. That's years old. Decades.... and... Oh my god. This is the WORST repair video ever. Not taking ALL THE HINTS: the three crosses on the transformer, the disconnected plug... but you just plug it in anyway. You could have fried all those electronics in the time you blink an eye. You're not being cautious and test it with your multimeter and/or a dummy load, but just DIRECTLY WITH YOUR EXPENSIVE MIXER. Do NOT take electronics ADVICE from this man! EVER. Stay away.

does this device have beamforming?

Awesome video thanks....only used the speakers a few times.... And they both have no tops...Fuming after spending so much money....😎👍 thanks again

Thank you so much, Nathan! Repairing my 1980s Onkyo CD player took about five minutes, thanks to your informative video. Salute!

Thx, perfect Produkt for me.

What if the cd transport reading some cds, and reject others? What might be the problem ? It's Sony kss151 laser that's making me problems here in Israel.

You could easily do this with your children and wives.

I am from Bangladesh 😢❤

Really Helpful with the little tips. Thanks very much.

Is there a way to lubricate it with white lithium grease or something?

hi is there case if you know of course to give command in antari z1200 without remote control ? only from a switch e.g

If i connect to my isp router directly i get 450mb but when i connect via my Deco M4 i get linited to 90mb any ideas! There are 4 m4's on the mesh network and they all have a good signal. I ran the network optimisation wizard still the same.

DO you have an opinion about replacing the battery with a huge LiFePO4 battery, more like 200AH? No more power out -that's the inverter limit, but lots more hold up time.

Thank you! This is my first night using and ive noticed there’s continuous white LED flashing lights on the back where the ethernet ports are. Is this normal?

Cheers pall worked a treat, I've been clawing my hair out trying to fix this.

Монитор классный , брал ещё в 2019г. до сих пор работает без нареканий . год выпуска монитора 09. 2018 г.!

3:24 Holy crap!! it worked. And to think i'd be nervous as a Kenwood engineer right now your doing their job "for free" Just out f curiosity, what does this do ? increase laser power or something?

It worked! I love repairing old technology and recently picked up a Sony mega bass boombox. The cd drive wasn’t working so I took it apart (had to anyways to clean it) and check everything and didn’t see a problem. Cleaned the laser and all. Wasn’t till I saw your video it started working and read it faster than any cd player I’ve ever had. I can’t believe I’ve been repairing technology for years and didn’t know there was a little knob to adjust the laser. Then again I haven’t had to mess around with lasers too much. Thanks for the video! I’m so gonna raise it up in the air and play music for my fiancé 😂 Anything to make her laugh

Thank you for the video! I have the same problem with the motherboard, no beep, no video. I think i need to replaced my motherboard! Cheers!

Amazing Work

Hi Nathan, thank you for this. What switch cleaner did you use to clean the faders? - Thanks

The threads don't mean anything. The transformer is embedded in hot glue, which is correct. Fakes usually don't have a transformer, or a fake transformer with the wiring going straight to the connector. Sorry to say, but you know nothing about these mics. You should learn before you post videos misleading people.

The ONLY WAY to be sure your Shure mic is real is buy directly from Shure! The internet is littered with fakes. EBay is a cesspool of fake Shure mics...

How can i solve ransomware attack and recover my files?

Thank you very much.5stars.

that's a steal! MAN!

My school has like 100 of these 😂

excellent speeds from EE

do they work with other routers ?

How to turn them off completely? There is no switch to cut the power..

Thank you for the demo

How long is the uk power cable

No explica cuanto tiempo puede seguir grabando después que se va la electricidad o si no graba más después después que se interrumpe el fluido eléctrico, quisiera saber, gracias por compartir 👍.

what is the highest core can i replace to celeron?

Saya mau kalau di kasih😊

2000 GBP for all that! Wow. over $7000 CAD today. (Board, Audio Rack, Flight case)

I bought one last week and it works fine😊

thank you thats was helpful

I found one of these in a skip and I’ll be honest I had no idea what it was and it doesn’t turn on so yeah I did find the video helpful and does anybody have any idea how it works and how do use it I reckon it’s been out of order a couple months because of the testing sticker on it

Every time is starts and stops it does a click sound. Is that normal?

Thanks a million! This just helped me a bunch!

Thank you - just got mine - this was very helpful. Thanks

That worked? I often wondered if I'd need a whole new board due to support chips? I guess if the OEM had various options, you could just upgrade the cpu later, way cool? I've got a nice machine buy w/Celeron, I'd like to go to at least i5, expected I'd need to swap moboard...

Turn it around bruh

Interesting you replaced a 2hole fan with a 4hole fan, and it worked perfectly?

Hi Nathan. I've had a pair of these mini LED moving head lights for many years, set as master-slave on sound activation (Srun). Having just seen your very interesting video I've now adjusted them differently (added rPan & rTil). Though I really want to adjust or modify the sensitivity so the music doesn't need to be as loud. I've added another amplifier wired to a pair of speakers in the roof cavity immediately above the master unit. Whilst I can clearly hear them inside the house through the Gyprock ceiling, the lights still don't trigger, even with the volume turned to max. I'm now thinking of experimenting with placing a speaker directly on top of the master, or cutting a vent hole through the ceiling, or possibly even rebating the base of the unit into the ceiling... Is there a way to make more sensitive? And do you know where the microphone is? (as I could relocate it into the ceiling by the speakers). I thought an advantage of a second amp would be that regardless of music volume (in the house), the lights would effectively have their own sensitivity via the second amp (as it gets it signal from the preamp RCA connection) Thanks, Brad

Its older and modern laptops don't have this anymore

Great tutorial, I'd just advise against force shutting down your computer by holding down power button during the boot phase. To avoid potential data corruption, better wait for it to boot up and do a regular soft restart or shutdown.

🤔